Lumen Switch Configuration

What do you want to control?

Choose your primary goal to see relevant options.

A Wired Device

Use the relay port to control toys, appliances, or other devices.

A Bluetooth Device

Send commands to a computer, tablet, or phone via Bluetooth.

Choose a Wired Action

Select what you want your wired device to do.

Sustained

Device is active only while you're touching the switch.

Latching

First touch turns on, second touch turns off.

Timed

Activate for a specific time, then auto turn off.

Momentary

Quick 250ms pulse on each touch.

User Timed

Hold time determines how long the device runs.

Minimum Hold

Hold until LED fills, then activates for set duration.

Choose a Bluetooth Action

Select what commands you want to send.

Send a command

Send a single command like Spacebar or Play/Pause.

Send alternating commands

First touch sends one command, next touch sends another.

Scan and send a command

Choose from multiple commands using LED scanning.

Customize Your Action

Configure how your action responds to your touch.

Activation Trigger

Choose when your action activates: Instant (immediately on touch), Hold & Confirm (after holding to prevent accidents), or Release (when you let go).

Trigger Type Details

Instant Activation: Action happens immediately when you touch the switch. Best for users with good motor control who want immediate response.

Hold & Confirm: You must hold the switch until the LED fills up to confirm your intent. Prevents accidental activation - ideal for users who may accidentally bump the switch.

Release Activation: Action happens when you let go of the switch. Useful for timing-based actions where the system needs to measure how long you held down.

LED Configuration

Enable LEDs

Brightness: 255

LED Pattern:

Pattern Types:
• Single Color: Use only primary color
• Multi-Color: Use primary + secondary colors for effects
• Two Colors (Active/Inactive): Primary when active, secondary when inactive
• Generated: Create dynamic color patterns automatically

Primary Color:

#26d0e4

Saturation

White Level: 0

Vibration Configuration

Enable Haptic Feedback

Choose how the device provides haptic feedback during interaction:

Initial Contact

Quick confirmation burst on first touch

Sustained

Continuous vibration while touching

Ramp Up

Intensity follows charge progress

Ramp + Success

Ramp up + celebration pulses

Completion

Success notification when task complete

Double Tap

Two quick confirmation pulses

Heartbeat

Lub-dub rhythm pattern

Pulse

Configurable on/off timing

Power Management

Enable LED Auto-Off

Auto-Off Timeout: 1 minutes

LEDs will automatically turn off after this period of inactivity to save battery

Device Controls

Debug Log

System initialized

Lumen Switch

What do you want to control?

A Wired Device

A Bluetooth Device

Choose a Wired Action

Sustained

Latching

Timed

Momentary

User Timed

Minimum Hold

Choose a Bluetooth Action

Send a command

Send alternating commands

Scan and send a command

Customize Your Action

Trigger Type Details

LED Configuration

Vibration Configuration

Initial Contact

Sustained

Ramp Up

Ramp + Success

Completion

Double Tap

Heartbeat

Pulse

Power Management

Device Controls

Debug Log

Usage Odometer